Camera Gear

A rig is not an accessory, it is a decision about what the camera is allowed to do. Every support trades repeatability against freedom: the steadier the rig, the more it commits you to the move you planned.

Three families of camera support: locked to the ground, running on a fixed path, and carried by an operator Locked to the ground Running on a path Carried
Every rig on this sheet is a variation on one of these three. The choice is really a trade between how repeatable the move is and how quickly you can change your mind about it.

The rigs

RigWhat it doesThe move it buysWhat it costs
TripodLocks the camera to the groundStatic, pan, tiltSlow to reposition
MonopodOne leg, operator steadies the restQuick static and pansNever truly locked
SliderShort rail, usually on a tripodPush in, pull out, small trackingLimited travel
Dolly & trackWheeled platform on laid trackLong, smooth, repeatable trackingTrack, time and a grip
Jib / craneCounterweighted arm on a pivotVertical sweeps, reveals, arcsSpace, crew, rigging time
SteadicamVest and sprung arm isolate the operatorFloating walk-and-followA trained operator, and stamina
GimbalMotorised three-axis stabiliserSmooth handheld-range movesBatteries, and a slightly gliding feel
Shoulder rigBraces the camera against the bodyReactive follow with some weightVisible breathing and sway
HandheldNo support at allChaos, urgency, documentaryHard to repeat take to take
Car mountSuction or clamp rig on a vehicleDriving shots, rig removalsSafety prep and permits
DroneFlying platform with its own gimbalAltitude, geography, impossible revealsAirspace rules and a licensed pilot
Motion controlRobot arm that records and replays a moveFrame-exact repeatsExpensive, and slow to programme

The rigs, drawn

TripodLocked off. The frame holds still, so performance carries the shot.
SliderA short straight move. Reveals, or a gentle drift across a subject.
Dolly & trackLonger, repeatable moves. Needs track, time and a grip.
Jib / craneVertical sweeps and big reveals. The camera rises without a cut.
SteadicamWorn on a vest and isolated by a sprung arm. Floating, walking shots.
GimbalMotorised three-axis stabiliser. Most of the Steadicam look, far less bulk.
Shoulder rigBraced against the body. Documentary immediacy with some control.
DroneAltitude and geography. Regulated airspace, and a permit in most cities.

Matching the rig to the move

Sheet 05 covers what each move means. This is how you actually get it on the day.

Push in
Slider for a short one, dolly and track for a long one. A zoom is not a substitute, because the perspective will not change.
Tracking alongside a walk
Dolly if the path is fixed and you need it identical every take. Steadicam or gimbal if the actor sets the pace.
Arc around a subject
Curved track, or a gimbal operator walking the circle. The gimbal is faster to set up and harder to match across takes.
Crane up at the end of a scene
Jib for a modest rise, a telescoping crane for anything larger. Budget the rigging time before you promise the shot.
Handheld urgency
Shoulder rig if you still want the frame readable, bare handheld if you want the audience unsettled.
Note

A stabiliser is not the same as a tripod. Steadicam and gimbal shots still drift, because the operator is still walking. That residual float is why they read as alive rather than locked off, and it is why a stabiliser cannot stand in for a static frame.

Rule

Choose the rig from the move, never the other way round. Decide what the shot has to do, then pick the cheapest support that does it. A crane that exists because it was already on the truck is the most expensive shot on the schedule.

Cinematography & Mise-en-Scène cheat sheets · built from The Foundations of Cinematography and Mise-en-Scène.